IHD3EB391L -

Inductor, Filter; 390uH; High Current; 20Awg, Axial; 15%; 0.288Ohms; 1.6A; 2500Vrms

聲明：圖片僅供參考，請以實物為準！

制造商：: Vishay Dale Vishay Dale
制造商產品編號：: IHD3EB391L
倉庫庫存編號：: 70201697
技術數據表：: Datasheet

訂購熱線： 400-900-3095 0755-21000796, QQ:800152669, Email:sales@szcwdz.com

由于產品數據庫龐大，部分產品信息可能未能及時更新，下單前請與銷售人員確認好實時在庫數量，謝謝合作！

IHD3EB391L產品概述

Electrical Specifications. Inductance: Measured at 1 V with no DC current. Incremental Current: The typical current at which the inductance will be decreased by 5% from its initial zero DC value. Dielectric Rating: 2500 V_RMS between winding and outer circumference to within 0.250" (6.35 mm) of the insulating sleeve edge. Operating Temperature: –55°C to +125°C (no load). –55°C to +85°C (at full rated current). Current Rating: Maximum continuous. Operating current (DC or RMS) based on a 40°C temperature rise. Tolerance: 15%.
Mechanical Specifications. Wire: Solid soft copper. Terminals: 20 AWG tinned copper leads. Coating: Polyolefin tubing — flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements. Core Material: Ferrite.

Printed Circuit Mounting

Protected By Polyolefin Tubing

High Saturation Bobbin Used Allowing High Inductance with Low DC Resistance

Pre-Tinned Leads

High Resistivity Core Offers Very High Parallel Resistance, Resulting in Maximum Coil Performance

20 Sleeveless Models Available at Reduced Cost

Brand/Series	IHD Series
Current Rating	1.6 A
Diameter, Lead	0.032 "
Inductance	390 μH
Length, Lead	1.13 "
Resistance, DC	0.288 Ohms
Temperature, Operating, Maximum	+125 °C
Temperature, Operating, Minimum	-55 °C
Termination	Through-hole
Tolerance	±15 %
Type	High Current
關鍵詞

IHD3EB391L -

Inductor, Filter; 390uH; High Current; 20Awg, Axial; 15%; 0.288Ohms; 1.6A; 2500Vrms

IHD3EB391L產品概述

IHD3EB391L產品信息

IHD3EB391L相關搜索