NCP692MNADJT2G -
NCP692MNADJT2G, LDO Voltage Regulator, Adjustable 1A, 1.25 to 5V +/-1.5%, 6-Pin DFN
聲明:圖片僅供參考,請以實物為準!
- 制造商產品編號:
- NCP692MNADJT2G
- 倉庫庫存編號:
- 70340987
由于產品數據庫龐大,部分產品信息可能未能及時更新,下單前請與銷售人員確認好實時在庫數量,謝謝合作!
NCP692MNADJT2G產品概述
The NCP690, NCP691, NCP692, NCV8690 CMOS LDO family provides 1 A of output current with enhanced ESD in either fixed voltage options or an adjustable output voltage from 5.0 V down to 1.25 V. This device is designed for space constrained and portable battery powered applications and offer additional features such as high PSRR, low Quiescent and Ground current consumption, low noise operation, short circuit and thermal protection. The device is designed to be used with low cost ceramic capacitors and is packaged in the 6-Lead DFN3x3 package.
Features:
Output Voltage Options: Adjustable, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V
– Other Options Possible
Adjustable Output by External Resistors from 5.0 V down to 1.25 V
Guaranteed 1 A Output Current
±1.5% Output Voltage Tolerance over All Operating Conditions (Adjustable)
±2% Output Voltage Tolerance over All Operating Conditions (Fixed)
Typical Noise Voltage of 50 Vrms without a Bypass Capacitor
Typical Dropout Voltage of 190 mV at 1 A (Vout = 2.5 V, TJ = 25°C)
Active Output Discharge
Active Low Enable Pin (NCP691 Device)
Active High Enable Pin (NCP692 device)
Enhanced ESD: 4 kV and 200 V
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC-Q100
Qualified and PPAP Capable
These are Pb-Free Devices