MCP1824T-3002E/OT產(chǎn)品概述
The MCP1824/MCP1824S is a 300 mA Low Dropout (LDO) linear regulator that provides high current and low output voltages. The MCP1824 comes in a fixed or adjustable output voltage version, with an output voltage range of 0.8 V to 5.0 v. The 300 mA output current capability, combined with the low output voltage capability, make the MCP1824 a good choice for new sub-1.8 V output voltage LDO applications that have high current demands. The MCP1824S is a 3-pin fixed voltage version. The MCP1824/MCP1824S is stable using ceramic output capacitors that inherently provide lower output noise and reduce the size and cost of the entire regulator solution. Only 1 μF of output capacitance is needed to stabilize the LDO. Using CMOS construction, the quiescent current consumed by the MCP1824/MCP1824S is typically less than 120 μA over the entire input voltage range, making it attractive for portable computing applications that demand high output current. The MCP1824 versions have a Shutdown (SHDN) pin. When shut down, the quiescent current is reduced to less than 0.1 μA. On the MCP1824 fixed output versions, the scaled down output voltage is internally monitored and a power good (PWRGD) output is provided when the output is within 92% of regulation (typical). The PWRGD delay is internally fixed at 110 μs (typical).
The over temperature and short circuit current-limiting provide additional protection for the LDO during system fault conditions.
Datasheet
