3723產品概述
Dual 1×30, High Speed, Multiplexer Card
The Model 3723 offers two independent banks of high speed 1×30 two-pole multiplexers that are ideal for high speed scanning applications. The two banks can automatically be connected to the Series 3700A mainframe backplane and optional DMM through the analog backplane connection relays. This connection allows the mainframe to reconfigure the Model 3723 as a single 1×60 twopole multiplexer or as a single 1×120 single-pole multiplexer. It also enables card-to-card expansion for even larger configurations.
By using high speed reed relays with actuation times of less than 0.5ms, this card can meet demanding throughput applications. Another feature of the Model 3723 is its single-ended, one-pole mode, which supports up to 120 channels of single-wire measurements.
The Model 3723 uses two 78-pin D-sub connectors for signal connections. For screw terminal connections, use the Model 3723-ST for two- and four-pole configurations or the Model 3723-ST-1 for single-wire applications.
Features:
60 two-pole or 30 four-pole channels for high speed scanning
120 channel single-pole mode for one-wire (common side) measurements
Analog backplane connection relays provide easy bank and card interconnections
200V, 1A switched or 1.25A carry signal capacity; 15W
Relay actuation time <0.5ms
20MHz bandwidth
Ideal for multi-channel I-V testing with Series 2600B SourceMeter® SMU instruments
Long life dry reed relays (>109 operations)