15150322601000 - 

har-flex® is a general-purpose PCB connector series based on a 1.27 mm grid with SMT termination technology.
With its straight, angled and cable variants, har-flex® provides connectivity solutions for many different board-to-board and cable-to-board applications. The different stacking heights of the mezzanine connectors and the flexible IDC connector cable lengths offer a high degree of freedom to the system design.
A broad choice of configurations between 6 and 100 contacts in even numbered positions is available.
HARTING har-flex® Connectors provide 100 percent coplanarity testing and standard fitting with pick and place pads that guarantee a simple, fully automatic and assembly of the PCBs.
Applications

Controllers

Drives

Sensors
Features

Robust design (solder hold-downs)

Wide range of pin counts available (all even numbers from 6 - 100)

4 stacking heights from 8mm to 13.8mm

SMT termination for reflow solder process

Pick & Place pads for automatic assembly

Tape & Reel packaging for pick-and-place machines

Secure solder connection (coplanarity of termination pins <0.1mm)

Flexible tolerances of PCB distance due to a wiping length of 1.5mm

MSL 1 The har-flex® angled connectors are made for right-angled motherboard-to-daughtercard applications and so called extender card applications (two angled connectors in one plane). The angled male connectors can be even mated with the cable connectors for flatband cables.